Merge branch 'master' into temperature_test

src/Meshing/Internal.py

@@ -57,6 +57,13 @@ class InternalMeshing(AMeshingTool):
 
         # we never modify original profiles, we work on the copies
         m_profiles = self.st_to_m(profiles, guide_list)
+
+        # Adapt the spacing to the kilometre-point direction. The value from
+        # the dialog is a distance, so only its magnitude is significant.
+        step = self.signed_step(
+            step, m_profiles[0].rk, m_profiles[-1].rk
+        )
+
         new_profiles = self.interpolate_transversal_step(m_profiles, step)
 
         for new_profiles2 in new_profiles:
@@ -65,6 +72,12 @@ class InternalMeshing(AMeshingTool):
 
         return new_profiles
 
+    @staticmethod
+    def signed_step(step, begin_rk, end_rk):
+        if end_rk < begin_rk:
+            return -abs(step)
+        return abs(step)
+
     def st_to_m(self, profiles, guide_list):
         guide_list = ["un"] + guide_list + ["np"]
         max_values = [0] * (len(guide_list) - 1)

src/View/BoundaryCondition/Edit/Table.py

@@ -143,21 +143,43 @@ class TableModel(PamhyrTableModel):
         self.update()
 
     def delete(self, rows, parent=QModelIndex()):
-        self.beginRemoveRows(parent, rows[0], rows[-1])
+        if not rows:
+            return
 
-        rows = list(map(
-            lambda r: self.get_true_data_row(r),
-            rows))
+        rows = sorted(set(rows))
+        rows = [
+            self.get_true_data_row(row)
+            for row in rows
+        ]
 
+        # A multiple selection may contain non-contiguous rows. A model reset
+        # accurately represents this atomic undo command, unlike one
+        # beginRemoveRows() call spanning rows that are not all removed.
+        self.beginResetModel()
+        try:
             self._undo.push(
                 DelCommand(
                     self._data, rows
                 )
             )
-
-        self.endRemoveRows()
+        finally:
+            self.endResetModel()
         self.update()
 
+    def undo(self):
+        self.beginResetModel()
+        try:
+            self._undo.undo()
+        finally:
+            self.endResetModel()
+
+    def redo(self):
+        self.beginResetModel()
+        try:
+            self._undo.redo()
+        finally:
+            self.endResetModel()
+
     def sort(self, _reverse, parent=QModelIndex()):
         self.layoutAboutToBeChanged.emit()
 

src/View/BoundaryCondition/Edit/UndoCommand.py

@@ -97,12 +97,11 @@ class DelCommand(QUndoCommand):
         QUndoCommand.__init__(self)
 
         self._data = data
-        self._rows = rows
-
-        self._bc = []
-        for row in rows:
-            self._bc.append(self._data.get_i(row))
-        self._bc.sort()
+        self._rows = sorted(set(rows))
+        self._bc = [
+            self._data.get_i(row)
+            for row in self._rows
+        ]
 
     def undo(self):
         for el in self._bc:
@@ -120,13 +119,17 @@ class SortCommand(QUndoCommand):
         self._data = data
         self._reverse = _reverse
 
-        self._old = self._data.data
-        self._indexes = None
+        # Keep the order of the complete underlying list, including soft
+        # deleted items. ``data`` only exposes visible items and therefore
+        # cannot reliably restore a sort after a delete/undelete operation.
+        self._old_positions = {
+            id(item): index
+            for index, item in enumerate(self._data._data)
+        }
 
     def undo(self):
-        ll = self._data.data
         self._data.sort(
-            key=lambda x: self._indexes[ll.index(x)]
+            key=lambda item: self._old_positions[id(item)]
         )
 
     def redo(self):
@@ -134,14 +137,6 @@ class SortCommand(QUndoCommand):
             _reverse=self._reverse,
             key=lambda x: x[0]
         )
-        if self._indexes is None:
-            self._indexes = list(
-                map(
-                    lambda p: self._old.index(p),
-                    self._data.data
-                )
-            )
-            self._old = None
 
 
 class MoveCommand(QUndoCommand):

src/View/Geometry/Table.py

@@ -259,6 +259,9 @@ class GeometryReachTableModel(PamhyrTableModel):
                 **data
             )
 
+        self.apply_meshing(new_profiles, data, tableView)
+
+    def apply_meshing(self, new_profiles, data, tableView):
         if new_profiles is None:
             return
 

src/View/Geometry/Window.py

@@ -350,14 +350,22 @@ class GeometryWindow(PamhyrWindow):
             tableview = self.tableView
 
             def fn():
-                self._table.meshing(mesher, data, tableview)
-            # self._table.meshing(mesher, data, tableview)
+                return mesher.meshing(self._reach, **data)
+
             dlg2 = WaitingDialog(
                 payload_fn=fn,
                 title="waiting_mesh",
                 parent=self
             )
             dlg2.exec_()
+
+            if dlg2.worker_exception is not None:
+                raise dlg2.worker_exception
+
+            # Models, undo stacks and selections belong to the GUI thread.
+            self._table.apply_meshing(
+                dlg2.worker_result, data, tableview
+            )
             self._table.update()
 
         except Exception as e:

src/View/WaitingDialog.py

@@ -47,9 +47,15 @@ class Worker(QObject):
         super(self.__class__, self).__init__(parent)
 
         self._payload_fn = payload_fn
+        self.result = None
+        self.exception = None
 
     def process(self):
-        self._payload_fn()
+        try:
+            self.result = self._payload_fn()
+        except Exception as exception:
+            self.exception = exception
+        finally:
             self.signalStatus.emit('end')
 
 
@@ -123,6 +129,14 @@ class WaitingDialog(PamhyrDialog):
         self._timer = QTimer(self)
         self._timer.timeout.connect(self.update_spinner)
 
+    @property
+    def worker_result(self):
+        return self._worker.result
+
+    @property
+    def worker_exception(self):
+        return self._worker.exception
+
     def update_spinner(self):
         self._spinner_step += 1
         self._spinner_step %= len(self._spin)